Research and Commercial Products

R.F.SHIELDED ENCLOSURES

  • Soldered Copper

    Gaven Industries' Soldered Copper Enclosures offer very high performance and have been used extensively in the Research, Security and Healthcare Industries.

    Panels of Copper sheet laminated to a 1/8" hard board are installed directly onto the walls and ceiling of the parent room's existing framing.

    The Copper sheets overlap adjacent sheets, and all seams are continuously soldered together forming an electrically seamless shield. Hundreds - or even thousands - of feet of seams will not electrically degrade over time because of corrosion or fatigue as with mechanically clamped or fastened joints. The panels are easily formed on site and can be used for shielded enclosures of any shape or size.

    Once completed, the Copper Shield is mated with Gaven Industries' other custom manufactured shield components to form a complete shielded system Unique to Gaven Industries, the entire system, including windows and doors, carry a lifetime warranty as standard on the performance of the shield.

    The construction of the floor varies and is based upon site requirements, but in all cases incorporates copper sheet, again with all seams overlapped and soldered.

    copper wall


    Copper Shielded wall section with additional interior framing to attach wall finishings.

  • SN-Shield™

    Gaven Industries' SN - Shield™ Enclosures offer high performance with the same ease of construction as the Soldered Copper R.F.Shielded Enclosures, at a more economical price.

    Panels of Tin Plated Low Carbon Steel sheet laminated to a 1/8" hard board are installed directly onto the walls and ceiling of a parent room.

    The SN - Shield™ panels overlap adjacent panel, and all seams are continuously soldered together forming an electrically seamless shield. Hundreds - or even thousands - of feet of seams will not electrically degrade over time because of corrosion or fatigue as mechanically clamped or fastioned joints can. The panels are easily formed on the job site and can be used for shielded encloscures of any shape or size.

    Once completed, the SN - Shield™ is mated with Gaven Industries' other custom manufactured shield components to form a complete shielded system. Unique to Gaven Industries, the entire system, including windows and doors, carry a lifetime warranty as standard on the performance of the shield

    The construction of the floor varies and is based upon site requirements, but in all cases incorporates SN - Shield™, again with all seams overlapped and soldered.

    copper wall

    SN-Shield™ wall section where interior finishes are attached directly over the shielding.

  • Econo-Shield

    Gaven Industries' Econo-Shield R.F. Shielded Enclosures are ideally suited for rectangular shaped rooms when a free standing, demountable shielded enclosure fits the project requirements.

    Shielding performance exceeds MIL-STD 73-2A and is greater than 100dB at frequencies up to 1GHz.

    Prefabricated 2.5" deep fire rated wood frame are wrapped with copper sheet. These prefabricated panels are screwed together on 4" centers to form the walls and ceiling. The R.F. Shielded ceiling is additionally supported from the structure above.

    An entire prefabricated enclosure is very lightweight and can be crated for shipping to anywhere in the world.

    The Econo-Shield is mated with Gaven Industries' other custom manufactured shield components to form a complete shielded system, and the entire system, including windows and doors, carry a 5 year warranty as standard on the performance of the shield.

  • Bolt Together Shield

    Gaven Industries' Bolt Together R.F. Shielded Enclosures are an ideal choice when building in seismically active areas that prohibits the use of any wood based products.

    Panels are constructed of either galvanized steel of aluminum ranging from 16 gage to 1/8" thick. Panels are normally 2" deep and bolted every 2" on center around the entire perimeter - and - unlike clamp together enclosures, the performance of the joints do not degrade because of wood compression or clamping member fatigue.

    Since Bolt Together Enclosures are free standing and made entirely of metal, they are ideal for installation in Seismic Zone 3 and 4 where building with any type of flammable materials may be prohibited. Sway bracing and parent room attach points can be provided.

    Warranted for a period of 5 years, Gaven Industries' Bolt Together R.F. Shielded Enclosures are a very cost effective solution that incorporates R.F. Shielding and Magnetic Shielding into one non - flammable enclosure.

    A 1" Lip is provided at each joint for fastening of interior furring or framing and finishes without penetrating the shield.

  • TI-Shield™

    Electrical conductivity, magnetic permeability, lowest weight to performance ratio for any material, ease of installation and a lifetime warranty are the hallmarks of Gaven Industries' TI - Shied™.

    No single conventional material can provide electromagnetic and radio frequency interference (EMI and RFI) shielding for wide frequency ranges. TI-Shield™, an EMS clad composite, sold exclusively by Gaven Industries Inc., combines the electrical conductivity of Copper with the magnetic permeability of a Proprietary Ferromagnetic Material to achieve high-energy conduction, absorption and reflection.

    Its high performance - to - weight ratio means that very thin sections provide more EMI protection than traditional materials, it attenuates both magnetic and electrical fields, while reducing system costs.

    At only .014" thick and .61 lbs/sqft, TI - Shield™ surpasses the magnetic performance of steel at 6 times the thickness and weight.

    Very high performance enclosures can be installed quickly with literally no structural modifications to the parent area and afford more usable space than any other comparable system.

brochure

Gaven Industries' Commercial Brochure

Home | © Gaven Industries Inc. 6655 N Noah Dr, Saxonburg,PA 16056 | Contact Us | Site Map